AIP Dragon Fire Distributor Installed

Small progress today. No write up, the diz install is pretty straight forward. Unplug harness connector, remove two bolts, make sure new unit's rotor is facing same direction as old one. (dotted notch on cam side of rotor is the side of the brush).. notch on top of cam journal should match diz.. or advance/retard as u need.

Also put in the non-resistor NGK's. (Stock#4930) BCP6ES .. meant for Saab's, but look identical and fit perfect, overgapped to .550.. we'll see if that needs to be adjusted before the StreetFire CDI is installed. 

Also removed timing chain upper guides.. and cleaned off valve cover.. also found that the spark plug hole gaskets werent aligned from when I installed the Magnum MaxDry gasket.. so I had to make sure they were right this time. 

Also removed refridgerant line off the fire wall.. pointless since I have no AC. will remove condensor and side canister soon. 

Tomorrow Im getting a temporary battery, so hopefully I'll get some driving video in. 

Comments

Popular posts from this blog

Looking for modifications for your u13?